top of page

Rapid Sanitizing System

Kill up to 99.99% of pathogens and viruses on Masks and other PPE equipment utilizing a chemical-free, dry ozone process. 


Ozone is more effective than chlorine in destroying viruses and bacteria. Fresh Gear could be the solution.

There are no harmful residuals that need to be removed after ozonation because ozone decomposes rapidly.

The ozonation process utilizes a short contact time (approximately 10 - 30 minutes).

No installation required. No tanks to fill or empty. No vents or drains.

Simultaneously Dries

The only machine that DRIES AND SANITIZES simultaneously.


UV Ozone generation provides consistent ozone levels, even with damp gear.

At Your Fingertips

LCD touch screen with Variable Cycles Times (20 to 60 minutes) and Data Display. View machine use statistics instantly.


Password authentication enables authorization codes for machine operation.

Patented Process

Proprietary ozone destruction technology enables optimum ozone levels and the greatest bacteria kill rates.

Easy to Use

No installation required. No tanks to fill or empty. No vents or drains.

Extensive Warranty

5 YEAR steel cabinet warranty, and 1 YEAR parts and labor warranty.

Trusted By the Pros

The same system used by the Federal Bureau of Prisons, Atomic Energy Canada, U.S. and Canadian military bases, U.S. Coast Guard, and other first responders and government agencies.

Contact Us for More Information or these FREE Reports:

  • Independent Lab Tests proving Ozone Destroys Bacteria Inside and Outside of Gear

  • Use of Gaseous Ozone for Eradication of MRSA

  • Ozone Gas is an Effective and Practical Antibacterial Agent

 Sanitizing Capacity (Military/ First Responders): 

  • 33 cubic feet (60% greater than the nearest competitor).

  • 32-35 tactical helmets, 21-24 tactical vests.

  • Processing capacity: 96-128 helmets/Masks per hour, 42-63 vests/hour.

  • Capacity will vary based on the size of the equipment.


  • Dimensions: Exterior: 48” width x 34” depth x 64” height; Interior: 47.5” x 29” x 46.5”.

  • Weight: Approximately 500 lbs.

  • Casters: 4” Industrial Grade Casters enable mobility. Two casters lock for stability.

  • Electrical:  Std. 110/120 volt, 8 amps, GFCI Plug, ESA approved.

  • Cabinet: Solid, 14 gauge, single-sheet, Stainless Steel (leak proof, rust proof).

  • Maintenance: Replace 2 UV lamp bulbs every 12 to 18 months and ozone deactivation module every 24 to 36 months.


Safety Features:  

  • Safety Approval: In addition to internal quality assurance procedures, each unit is individually inspected and approved by CSA designated agency to achieve CSA Standard SPE-1000-09 for electrical products.

  • Industrial strength PLC controls ozone generation, distribution, destruction and monitors components.

  • No failure-prone circuit boards utilized.

  • Advanced ozone destruct technology: Ensures that ozone has reverted back to oxygen before the doors can be opened by the operator.

  • Meets OSHA and MOL requirements.

  • Electronic door lock: The door automatically locks during operation. The unit won’t operate without door sealed.

  • Circuit verification: The machine will not operate if safety component failure is detected.

  • Stainless Steel chamber: Ozone resistant stainless steel leaves no room for leakage or corrosion.

  • Ozone-resistant door seal: EPDM seals around the single-sheet solid steel door.

bottom of page